3 phases input single phases output UPS system uninterruptible power supply 15KVA
1.UPS backup UPS system;
2.3 phases input single phases output;
3.Double online conversion;
H Series 3 Phases Input Single Phases Output 20KVA High Frequency Online UPS
Key features:
1. True online double conversion technology
2. Wide input voltage range
3. Zero transfer time
4. Protection against all types of power problems
5. No add-on CNTL unit required for parallel connection
6. Low initial investment and flexible for future expansion
7. Highest reliability and maximum performance for power sharing and redundancy
8. Equipped with maintenance bypass switch
The best charger is designed to recharge low battery as quickly as possible with out damaging batteries in 2 amp up to 8 amp and 240VDC. Allowing 90% recharge in as little as 10 hours after a total drain.
a). Audible and visual over-load indicator
The incorporated LED over load indicator prevents ups overloads and premature failure of the UPS.
b). N+1 parallel redundancy
Allows a 10 KVA to grow up to 30KVA or 20KVA with 10KVA redundancy and a 20 KVA to 60 KVA or 40 KVA with 20 KVA redundancy allowing user to add capacity as needed and lower investment.
c). Simplified board separation
Dependent on the units all operation are separated into 5 PC boards allowing quick respond to damages and provides our valued dealers with simplified inventory and faster service to the end users.
d). Dynamic bypass
Automatic dynamic bypass and manual bypass provide a loop to repair UPS with out having to disconnect loads ideal for non-stop computing for critical applications.
e). SNMP slot
Provides remote monitoring and control of UPS where a PC is not present or where this function is needed to be separated.
f). AS 400 dry contact card
Optional card to communicate in AS 400 protocols
g). Sine wave output
True sine-wave output with a 3% THD on batteries. This feature provides dependable and compatible power for your most critical applications.
h). True double conversion technology with zero transfer time
This advance design provides the closest you can get to pure constant power in the industry.
Technical specifications:
|
Model
|
H10KL3/1
|
H15KL3/1
|
H20KL3/1
|
|
Rated power
|
VA/W
|
10KVA/7KW
|
15KVA/10.5KW
|
20KVA/14KW
|
|
Input
|
Nominal voltage
|
380VAC
|
|
Voltage range
|
304~478VAC
|
|
Phase
|
3 phase(4 wires plus ground)
|
|
Frequency range
|
46~54Hz
|
|
Power factor
|
0.95
|
|
Connection
|
Hard wired
|
|
Output
|
Voltage
|
220VAC±1%, single phase
|
|
Frequency
|
50Hz±0.1%(battery mode)
|
|
Waveform
|
Pure sine wave
|
|
Power factor
|
0.8
|
|
Voltage distortion
|
£ 2% under linear load
|
|
Overload capability
|
105%~130% for 10 min., 130% for 1 min.
|
|
Current crest ratio
|
3:1 Max.
|
|
Battery
|
Type
|
Sealed, maintenance free, lead-acid
|
|
Nominal DC voltage
|
240VDC
|
|
Back-up time(full load)
|
Depends on the capacity of the external battery capacity
|
|
Connection
|
External battery socket
|
Hard wired
|
|
Transfer time
|
0ms
|
|
Maintenance bypass switch
|
Yes
|
|
LED indicators
|
Status
|
Load level/battery level, battery, utility power, inverter, bypass, overload, fault
|
|
Audible alarm
|
Bypass
|
Alarm beeps every two minutes
|
|
Battery discharge
|
Alarm beeps every four seconds, every second if battery low
|
|
Overload
|
Alarm beeps two for every second
|
|
Fault
|
Alarm beeps continuously
|
|
Acoustic noise
|
At 1 meter distance
|
£55 dB
|
£60 dB
|
|
Communication
|
DB-9 port
|
RS232 serial interface
|
|
Intelligent slot
|
Options: Webpower, AS400 or Winpower CMC
|
|
Parallel port
|
Up to three units in parallel for power redundancy and load sharing
|
|
Environmental
|
Operating temperature
|
0~40°C
|
|
Operating humidity
|
20% ~ 90% non-condensing
|
|
Weight
|
Net(Kg)
|
38.5
|
55
|
|
Dimension
|
WxDxH(mm)
|
260 x 570 x 717
|
Your message must be between 20-3,000 characters!
